Keep 'run' for software targets only, i.e. QEMU v7/v8 and FVP.

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

Factorize embedded file list and rootfs generation for fvp, juno,
mediatek, qemu, qemu_v8 and rpi3.

busybox is madatory to all 'common' rootfs.
optee-client, xtestn helloworld are always embedded: moved to common.

Remove obsolete CFG_DEV_PATH.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: Joakim Bech <joakim.bech@linaro.org> (RPi3, MTK8173)
Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (qemu_v7/v8)

When we started using GCC5.x the path for libraries was changed. The
same change is needed for MTK8173 also.

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: David Brown <david.brown@linaro.org>
Tested-by: Victor Chong <victor.chong@linaro.org> (qemu)
Tested-by: Joakim Bech <joakim.bech@linaro.org> (RPi3 with mods
to build_ta_helloworld_qemu.sh for a 64-bit build)

- Adds legacy toolchain for use in older edk2 projects, this is the only
  project using the pre 5.x toolchain for now
- Removes the bare metal toolchain
- qemu: Change the path for libraries for GCC5
- fvp: compiler changes for ARM-TF and EDK2
       Update libteec path in initramfs
- mtk: Toolchain and libteec path updates
- juno: Toolchain and libteec path updates

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU, FVP, HiKey)
Tested-by: Pascal Brand <pascal.brand@linaro.org> (QEMU)
Tested-by: Pascal Brand <pascal.brand@linaro.org> (FVP)

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Victor Chong <victor.chong@linaro.org> (QEMU with CONFIG_OPTEE=m)
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU)

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (MT8173-EVB)
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>

Signed-off-by: SY Chiu <sy.chiu@linaro.org>
Tested-by: SY Chiu <sy.chiu@linaro.org> (MT8173 EVB)
Tested-by: Joakim Bech <joakim.bech@linaro.org> (MT8173 EVB)
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>

Signed-off-by: SY Chiu <sy.chiu@linaro.org>
Tested-by: SY Chiu <sy.chiu@linaro.org> (MT8173 EVB)
Tested-by: Joakim Bech <joakim.bech@linaro.org> (MT8173 EVB)
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>

Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Signed-off-by: Pascal Brand <pascal.brand@st.com>

Signed-off-by: James Kung <james.kung@linaro.org>
Tested-by: James Kung <james.kung@linaro.org> (MT8173 EVB)
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>

common: Add CROSS_COMPILE_ta_arm## flags
hikey and mediatek: Update with new TA dev kit name

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

- Kernel config fragments that were used by the QEMU makefile are
merged into kconfigs/qemu.conf. Now, each platform has its own file
in kconfigs/
- All platforms: CONFIG_DMA_SHARED_BUFFER cannot be enabled directly
because it is  a not a visible symbol (has no prompt in Kconfig).
CONFIG_DRM is set instead which depends on DMA.
- kconfigs/hikey.conf: keep only what is necessary

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (FVP, HiKey)
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU, MTK8173)

Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: SY Chiu <sy.chiu@linaro.org> (MT8173 EVB)
Tested-by: Pascal Brand <pascal.brand@linaro.org> (QEMU)
Tested-by: Pascal Brand <pascal.brand@linaro.org> (FVP)
Signed-off-by: Pascal Brand <pascal.brand@st.com>

Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Pascal Brand <pascal.brand@st.com>

Signed-off-by: Pascal Brand <pascal.brand@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

The code added by commits d6536da6 ("Commonlize xtest compilation
among all platforms") and 070d9559 ("common build: optee
components") introduces race conditions that break parallel build (make
-jX). This is due to manually launching a make sub-process to run the
-common targets, and can be fixed by just declaring a dependency
instead. Specific flags are appended to common flags, rather than
passed as arguments to a new "make" sub-process.

So, basically:

 foo-common:
 	$(MAKE) -C foo_dir [A=a B=B]

 foo:
 	$(MAKE) foo-common [C=c]

is turned into:

 FOO_COMMON_FLAGS ?= A=a B=b
 foo-common:
 	$(MAKE) -C foo_dir $(FOO_COMMON_FLAGS)

 FOO_COMMON_FLAGS += C=c
 foo: foo-common

At the same time this allows foo: to override flags, for instance
set A=aa in the above example (prior to this, A=a would have had a
higher priority).

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Pascal Brand <pascal.brand@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

Signed-off-by: Pascal Brand <pascal.brand@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

This is the first patch of a serie that show how makefile for specific
platform support may use common rules. comon.mk is introduced. It contains:
- common variable definitions, such as the compilers
- common git to use and path (typically the OP-TEE ones)
- common macros (CCACHE, and others to come).

Signed-off-by: Pascal Brand <pascal.brand@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

Signed-off-by: James Kung <james.kung@linaro.org>
Tested-by: James Kung <james.kung@linaro.org> (MT8173_EVB)

Signed-off-by: SY Chiu <sy.chiu@linaro.org>
Tested-by: SY Chiu <sy.chiu@linaro.org> (MT8173_EVB)
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>

This is the first commit containing helper makefiles to be able to build
OP-TEE easily regardless of previous knowledge of OP-TEE.

To use this particular git and the makefiles, you should have installed
the environment according to the instructions at:
  https://github.com/OP-TEE/manifest/blob/master/README.md



In this commit there are support for building OP-TEE for:
 - QEMU (default)
 - FVP
 - Hikey

More targets will be added later on.

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU, FVP)
Tested-by: Victor Chong <victor.chong@linaro.org> (Hikey)