Build support for generic driver on HiKey.

Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Signed-off-by: Pascal Brand <pascal.brand@st.com>

To make it a bit easier to understand how to do a recovery and how to
flash HiKey, we have added a new make target for recovery which tells
how to configure the jumpers and the initiates the recovery itself. In
addition to this we have changed the "flash" make target so that it
does the same as stated in the instructions on the 96boards "Getting
started" page.

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (HiKey)
Reviewed-by: Victor Chong <victor.chong@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Victor Chong <victor.chong@linaro.org> (hikey)
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

common: Add CROSS_COMPILE_ta_arm## flags
hikey and mediatek: Update with new TA dev kit name

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Victor Chong <victor.chong@linaro.org> (hikey)
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

- Kernel config fragments that were used by the QEMU makefile are
merged into kconfigs/qemu.conf. Now, each platform has its own file
in kconfigs/
- All platforms: CONFIG_DMA_SHARED_BUFFER cannot be enabled directly
because it is  a not a visible symbol (has no prompt in Kconfig).
CONFIG_DRM is set instead which depends on DMA.
- kconfigs/hikey.conf: keep only what is necessary

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (FVP, HiKey)
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU, MTK8173)

Sometimes it happens that the umount fails saying that a device/resource
is busy when trying umount the device after the filesystem has been
created. We don't know how and why this happens, but in the meantime
while waiting for a proper solution we have added a sleep that seems to
solve the problem.

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

Fix bug reported in https://github.com/OP-TEE/optee_os/issues/542



Signed-off-by: Victor Chong <victor.chong@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>

Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Pascal Brand <pascal.brand@st.com>

Adds two new targets, one that downloads the necessary nvme.img file and
another target that flash the device. We have also added a couple of
.PHONY directives to a few targets.

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Victor Chong <victor.chong@linaro.org>
Reviewed-by: Pascal Brand <pascal.brand@linaro.org>

Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: SY Chiu <sy.chiu@linaro.org> (MT8173 EVB)
Tested-by: Pascal Brand <pascal.brand@linaro.org> (QEMU)
Tested-by: Pascal Brand <pascal.brand@linaro.org> (FVP)
Signed-off-by: Pascal Brand <pascal.brand@st.com>

Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Pascal Brand <pascal.brand@st.com>

Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Pascal Brand <pascal.brand@st.com>

The code added by commits d6536da6 ("Commonlize xtest compilation
among all platforms") and 070d9559 ("common build: optee
components") introduces race conditions that break parallel build (make
-jX). This is due to manually launching a make sub-process to run the
-common targets, and can be fixed by just declaring a dependency
instead. Specific flags are appended to common flags, rather than
passed as arguments to a new "make" sub-process.

So, basically:

 foo-common:
 	$(MAKE) -C foo_dir [A=a B=B]

 foo:
 	$(MAKE) foo-common [C=c]

is turned into:

 FOO_COMMON_FLAGS ?= A=a B=b
 foo-common:
 	$(MAKE) -C foo_dir $(FOO_COMMON_FLAGS)

 FOO_COMMON_FLAGS += C=c
 foo: foo-common

At the same time this allows foo: to override flags, for instance
set A=aa in the above example (prior to this, A=a would have had a
higher priority).

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Pascal Brand <pascal.brand@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

Signed-off-by: Pascal Brand <pascal.brand@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

This is the first patch of a serie that show how makefile for specific
platform support may use common rules. comon.mk is introduced. It contains:
- common variable definitions, such as the compilers
- common git to use and path (typically the OP-TEE ones)
- common macros (CCACHE, and others to come).

Signed-off-by: Pascal Brand <pascal.brand@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

Signed-off-by: Pascal Brand <pascal.brand@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org>

Signed-off-by: Pascal Brand <pascal.brand@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

This is the first commit containing helper makefiles to be able to build
OP-TEE easily regardless of previous knowledge of OP-TEE.

To use this particular git and the makefiles, you should have installed
the environment according to the instructions at:
  https://github.com/OP-TEE/manifest/blob/master/README.md



In this commit there are support for building OP-TEE for:
 - QEMU (default)
 - FVP
 - Hikey

More targets will be added later on.

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>
Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU, FVP)
Tested-by: Victor Chong <victor.chong@linaro.org> (Hikey)